Active Recovery with Blood Flow RestrictionActive Recovery
Active Recovery with Blood Flow Restriction: 10-minute active recovery protocol performed with blood flow restriction using a pneumatic cuff set at 60% of the participant's total occlusion pressure.
Active Recovery: 10-minute active recovery protocol.
Study summary
Street running has become an increasingly popular sport. As a result, effective recovery strategies after exercise are essential. In this context, two techniques stand out: one already validated, active recovery (AR), and another with potential, blood flow restriction (BFR). This study aims to investigate whether using both techniques simultaneously can benefit practitioners and improve outcomes compared to complete rest.
Eligibility
Sex
MALE
Min age
18 Years
Max age
40 Years
Healthy volunteers
Accepted
Inclusion Criteria:
* Individuals who present one or more of the following characteristics will not be included:
* 1 presence of any health condition that contraindicates or prevents exercise;
* 2 diabetes and diagnosed high blood pressure;
* 3 inflammatory, psychiatric, cardiovascular and/or respiratory rheumatological disease; - -4 being dependent on alcohol, consuming drugs and/or being a smoker;
* 5 history of knee surgery (e.g., meniscal repair and ligament reconstruction) or recent lower limb musculoskeletal injury that may impair performance during tests or interventions (e.g., muscle injury, tendinopathy, patellofemoral pain and/or back pain column in the last six months);
* 6 use of ergogenic supplements to improve physical performance and/or muscle mass and/or vasoactive medications;
* 7 having one or more risk factors predisposing to thromboembolism
Exclusion Criteria:
* Participants will be excluded from the study if they:
* 1 have a health problem that does not allow them to continue;
* 2 wish to leave the study;
* 3 not sign the consent form
Primary outcome measure(s)
Isometric strength of the triceps surae — Change from baseline at 96 hours after exercise The isometric peak torque of the triceps surae will be measured using a digital handheld dynamometer (DD-300, Instrutherm). Participants will lie in a prone position with the knee flexed at 90°, foot dorsiflexed, and will be instructed to push maximally against the dynamometer. Three attempts will be performed with a 1-minute rest interval. The highest value will be used for analysis.
Aerobic capacity — Change from baseline at 96 hours after exercise Aerobic capacity will be evaluated using a 3-minute all-out running test (TM3) on a non-motorized treadmill. After a 5-minute warm-up at 7 km/h, participants will run at maximal effort for 3 minutes. Power and velocity outputs will be recorded by the treadmill's sensors and used to calculate critical power (CP) and critical velocity (CV).
Lower limb muscle power — Change from baseline at 96 hours after exercise Muscle power will be assessed through the Squat Jump test using a contact platform (Multisprint). Participants will begin in a 90° knee flexion position (verified with a goniometer), with hands on hips, and will perform a vertical jump without countermovement. Variables to be analyzed will include jump height, modified reactive strength index, jump power, and take-off moment.
Muscle soreness and pain threshold — Change from baseline at 96 hours after exercise Muscle soreness will be assessed using a Numeric Pain Rating Scale (0-10). Pain threshold will be measured with a pressure algometer (FPX 50/220; Wagner) at four sites: biceps femoris, rectus femoris, tibialis anterior, and gastrocnemius. Measurements will be recorded in kgf and will not exceed 2.55 kgf.
Perceived exertion, recovery, and discomfort — Change from baseline at 96 hours after exercise Perceived exertion, recovery, and discomfort will be measured using the Borg CR-10 scale (0-10). Participants will rate: (1) exertion as whole-body effort, (2) discomfort as muscular sensations in the lower limbs, and (3) recovery as general physical and psychological recovery. Values will be individually recorded at each time point.
Myotonometry — Change from baseline at 96 hours after exercise Muscle tone, stiffness, and elasticity will be measured using the MyotonPRO device. The probe will be positioned perpendicularly over the following sites: biceps femoris, rectus femoris, tibialis anterior, and gastrocnemius. The device will apply a 0.18 N pre-load and a 0.40 N impulse to induce tissue oscillation for measurement.
Bioelectrical impedance analysis — Change from baseline at 96 hours after exercise Bioimpedance will be measured using a tetrapolar device (BIA Analyzer, 50 kHz, 800 µA). Electrodes will be positioned on the biceps femoris, rectus femoris, tibialis anterior, and gastrocnemius. Analyzed variables will include resistance (R), reactance (Xc), phase angle (PhA), and tolerance ellipse, via Bioscan software.
Heart rate variability (HRV) — Change from baseline at 96 hours after exercise HRV will be assessed using a validated monitor (Polar V800). RR intervals will be collected at rest (10 minutes), during a 10-km run, and post-intervention (60 minutes). On other days, collections will last 20 minutes. Participants will be instructed to avoid stimulants during data collection.
This page summarises publicly available registry data for informational purposes — not medical advice. Eligibility is determined by each study team; patients should discuss participation with their clinician.
We use cookies to analyse site traffic and improve your experience. With your consent, we may also use cookies for advertising. You can change your choice at any time.
