Efficacy of Ultrasound-Guided Genicular Nerve Radiofrequency Ablation Therapy

Condition(s) studied

Investigational drug(s) / intervention(s)

2-point Radiofrequency Ablation: For the radiofrequency ablation (RFA) procedure, a 10 cm long, 22 gauge RF cannula with a 10 mm active tip (Model SC-K, Top Neuropole, MPS Medical Product Service GmbH, Germany) will be used. In order to increase the accuracy of the location determined by ultrasound, sensory stimulation will be applied at a frequency of 50 Hz and with a threshold value lower than 0.6 volts. In order to prevent the motor nerves from being affected, the absence of lower extremity muscle fasciculations in the relevant area will be confirmed with 2 volt stimulation at 2 Hz frequency. Patients in 2 nerve groups (SM and IM) will undergo 2-point RFA at 42°C using a 120-second pulse RFA generator (TOP Lesion Generator TLG-20, MPS Medical Product Service GmbH, Germany). To address any discomfort that may occur after the procedure, a total of 2 cc of betamethasone (5 mg+2 mg/1 cc) and %2 lidocaine (1 cc) will be injected into the points where RFA is applied, after aspiration.

3-point Radiofrequency Ablation: Description: For the radiofrequency ablation (RFA) procedure, a 10 cm long, 22 gauge RF cannula with a 10 mm active tip (Model SC-K, Top Neuropole, MPS Medical Product Service GmbH, Germany) will be used. In order to increase the accuracy of the location determined by ultrasound, sensory stimulation will be applied at a frequency of 50 Hz and with a threshold value lower than 0.6 volts. In order to prevent the motor nerves from being affected, the absence of lower extremity muscle fasciculations in the relevant area will be confirmed with 2 volt stimulation at 2 Hz frequency. 3-point RFA will be applied to patients in 3 nerve groups (SM, SL and IM) using a generator (TOP Lesion Generator TLG-20, MPS Medical Product Service GmbH, Germany) in the form of 120-second pulse RFA at 42°C. To address any discomfort that may occur after the procedure, a total of 2 cc of betamethasone (5 mg+2 mg/1 cc) and %2 lidocaine (1cc) will be injected into the points where RFA is applied, after aspiration.

5-point Radiofrequency Ablation: Description: For the radiofrequency ablation (RFA) procedure, a 10 cm long, 22 gauge RF cannula with a 10 mm active tip (Model SC-K, Top Neuropole, MPS Medical Product Service GmbH, Germany) will be used. In order to increase the accuracy of the location determined by ultrasound, sensory stimulation will be applied at a frequency of 50 Hz and with a threshold value lower than 0.6 volts. In order to prevent the motor nerves from being affected, the absence of lower extremity muscle fasciculations in the relevant area will be confirmed with 2 volt stimulation at 2 Hz frequency. 5-point RFA will be applied to patients in 5 nerve groups (SM, SL and IM, recurrent fibular nerve-RFN, infrapatellar branch of saphenous nerve-IPBSN) via same generator in the form of 120-second pulse RFA at 42°C. To address any discomfort that may occur after the procedure, a total of 2cc of betamethasone (5mg+2mg/1cc) and %2 lidocaine (1cc) will be injected into the points where RFA is applied, after aspiration.

Study summary

The main symptom of knee osteoarthritis, which occurs after damage to the joint cartilage with age, is pain, but this symptom often becomes chronic. Current conservative treatments have moderate effects on chronic knee pain and their use is limited due to the risk of side effects. In addition to pain, patients also experience other symptoms.

As a result of the osteoarthritis process, prorioception in the knee is impaired with a decrease in mechanoreceptors, resulting in loss of balance and an increase in the risk of falling.

Eligibility

Primary outcome measure(s)

• Cybex 770, Humac Norm Dynamometer (CSMI, Stoughton, MA, USA): Isokinetic muscle strength of the quadriceps and hamstring muscles — baseline, 1st month and 3rd month
  Cybex 770, Humac Norm dynamometer (CSMI, Stoughton, MA, USA) will be used to measure the isokinetic muscle strength of the quadriceps and hamstring muscles. During the test, while the knee joint moves from 90 degrees to 0 degrees, 5 maximum contraction repetitions are provided at an angular speed of 60/sec for muscle strength and 15 maximum repetitions of contraction at an angular speed of 180/sec are provided for muscle endurance.10-second rest period is left between repetitions.The preparation set is applied before the test.Afterwards, there is a 2-minute rest period before starting the test.Isokinetic knee extensor and flexor mean peak torque is determined and It is standardized according to body weight(Peak torque/body weight:Newton-metre/kg).Higher values in peak torque indicate better levels of muscle strength and endurance.
• HUBER 360 Evolution Device (LPG, Valence, France) — baseline, 1st month and 3rd month
  HUBER 360 Evolution device will be used in balance-coordination evoluation.The patient will be placed on a multi-axis platform and 4 different tests will be applied.
• Cybex 770, Humac Norm dynamometer (CSMI, Stoughton, MA, USA): Proprioception of the knee joint — baseline, 1st month and 3rd month
  A Cybex 770, Humac Norm dynamometer (CSMI, Stoughton, MA, USA) will be used to measure proprioception of the knee joint. During the test, participants will be blindfolded to eliminate visual input. Initially, for the preparation set, the participants' knee joint will be passively flexed from 90 degrees to 45 degrees and they will be provided with an understanding of the test angle. During the test, the device will enter isokinetic con/con mode and the participant will be able to actively move the knee. When the participant moves the knee to the test angle, the value will be recorded and the absolute angular error, i.e. the difference between the recorded angle and the target angle (45 degrees), will be determined. The test will be repeated 3 times and the values will be averaged.The farther the measured value is from the target value, the more impaired proprioception is.

Trial sites (1)

Other trials for the same condition